Online Shop

Raymarine Approved Dealer




Lindon Lewis Marine are main Raymarine® UK installing dealers. RussellW@pushtheboatout.com for a quote or to discuss upgrading. Call 01932 247427.


New Ideas from Volvo Penta




Click Here for the latest innovations from Volvo Penta® .



Rule Rule-Mate Bilge Pump
Rule Rule-Mate Bilge Pump
Part Number: MD049490

Rule Rule-Mate Bilge Pumps
The Rule-mate consists of a powerful rule bilge pump and a new non-mercury float switch in a single housing.
Fully automatic but will only turn on when the water level rises.
There is no cycling and no battery drain.
The pump remains off until the internal float switch rises and the pump stays on until the water is evacuated.
The pump's internal computer senses no load (water) against the impeller and then shuts off.
A detachable strainer provides easy access to the impeller area for removal of debris.
Each pump is easily installed with the pump and switch internally wired.
A third wire allows the pump to be connected to a manual switch if so desired.

Rule-Mate 500 GHP:
Motor: 12 volt
Amp draw: 2.5a
Fuse size: 2.5a
Discharge: 19mm
Height: 100mm
Width: 125mm
Depth: 82mm
Weight: 0.45kg

Rule-Mate 750 GHP:
Motor: 12 volt
Amp draw: 4.0a
Fuse size: 5.0a
Discharge: 19mm
Height: 100mm
Width: 125mm
Depth: 82mm
Weight: 0.59kg

Rule-Mate 1100 GHP:
Motor: 12 volt
Amp draw: 5.0a
Fuse size: 6.0a
Discharge: 28mm
Height: 100mm
Width: 125mm
Depth: 82mm
Weight: 0.68kg



Price: 85.07 (Including VAT at 20%)


Quantity: